here is the friend of many adventures, some can not be seen as a "handyman" given the size, but ... know him better I can happily say that he does his job well, very well. As a good self
curious problems to solve them without me so much about. I bought directly from China, directly from the manufacturer for an affordable price that the costs were higher are the taxes, customs clearance, plus various other accessories such as container inspection, cleaning etc etc
arrival appeared well-packed , with spare piston rings, belts of trapezoidal transmission, all well mounted on a platform of iron enclosed in a multilayer fine.
Given the small size does not need foundation, but require a concrete base on which to drown unap iastra 15mm thick cion for securing prisoners, among the piestra and the base of cast iron was added a layer of rubber with a thickness of 5 mm. All this rests on a plywood plate thickness of 10mm.
E 'was necessary to postpone the foot pedal at the base of the concrete base, right on the base (to include the spaces) was mounted electric motor, using special hardware anti-vibration rubber, and then changed upon the straps of the other trasmisione appropriate action.
The hammer worked well for about a month, then lost power and then by most interesting to me are taken apart piece piece. Noting with great joy that my problem was trivial, that is a grain that was screwed to the cylinder compression lose swing. At first I was very worried, well beyond a simple grain screwed ....
Certainly the time used for the removal was not in vain, I see the way he was the hammer in every smallest part, did a minimal adjustment of old-fashioned way, with file and various tools from "fineur" so old-fashioned, eliminated sporcizioe some small residual sands of the merger and replaced all of the base .... I left without anxiety.
So if you have questions about dell'Anyang hammers, just ask, then I have seen bigger ones up to a C41-45 but on balance they are all almost the same, just change the maximum square / round forgeability. My
I cornered warming myself under a nice piece of 40mm of C45, to build an ax and to my surprise I was able to forge, some meters a little more time but not much. Immediately after running
hio splitting wedges for some nostalgic and Susa also been carried out here are in no more than 25 min. What about
am satisfied to the point of preparing myself made several bats flying from the original sostituitre in exchange for various operations of forging more artistic, and always in C45 not hardened, so as to avoid breakage, which with 245 strokes / min Possoni become very dangerous.
Specifications:
Ram weight (kg) 15
Maximum blow energy(kj) 0.16
Number of blows per minute(min-1) 245
Maximum round steel can be forged(Diameter)(mm) 35
Maximum square steel can be forged(mm) 30x30
Distance from bottom die surface to base(mm) 370
Machine floor space(L x W)(mm) 850x500
Machine height (above the ground) (mm) 980
Motor Type Y90L-4
Rate power(kw) 2.2
Total weight of the hammer (kg) 260
0 comments:
Post a Comment